Cement
ADVANCEMENT™ HS TYPE 1L COMMON CEMENT
ADVANCEMENT™ HS is a portland-limestone blended cement manufactured for general use when high sulfate resistance is required. It reduces the amount of CO2 in the manufacturing process as compared to common ASTM C150 cements by approximately 10% while maintaining product performance requirements.
-
Replacement product for Riverside Type I/II/V cement
-
General purpose Portland limestone cement with high sulfate resistance
-
Complies with ASTM C595 Portland limestone blended cement Type 1L
Size
94 LB Bag
2000 LB Sack
Bags/Pallet
35
1 Sack
RIVERSIDE TYPE III CEMENT
Type III cement is a portland cement manufactured for the purpose of obtaining high early strengths. This is accomplished by altering the chemical composition of the cement and increasing its fineness.
-
Type III is chemically and physically similar to Type I. Often used to achieve lighter colors at a lower cost than white cement
-
Color is off white/light gray
Size
94 LB Bag
2000 LB Sack
Bags/Pallet
35
1 Sack
RIVERSIDE PLASTIC CEMENT
Plastic cement is a specialty cement particularly for plaster and stucco applications. Plastic cement is interground with plasticizing agents designed to enhance the desirable properties of portland cement- based plaster.
-
Plasticized portland cement with improved workability for use in plaster and stucco mixes only
-
Superior board life
-
Excellent workability
-
Improved pumpability
Size
94 LB Bag
2000 LB Sack
Bags/Pallet
35
1 Sack
LEHIGH TYPE 1 WHITE CEMENT
Lehigh White Cements are regularly used to produce architectural concrete. General applications include cast‐in‐place or precast wall panels, floors, slabs, terrazzo, thin‐set and title grouts, cast stone, masonry units and mortars, stucco, swimming pools & spas, glass fiber rein‐ forced concrete, ornamental statuary, floor tiles, concrete roof tiles, perimeter security, pavers and traffic safety items such as concrete median barriers, bridge parapets, pedestrian crosswalks, curbs and other delineators. White cement is often used to produce bright finishes, vibrant colors or ultra high performance concretes that look great and provide structural performance that make them ideal for resilient building applications.
-
Used to produce bright finishes and vibrant colors in architectural concrete.
-
Complies with ATSM C150 standard specification for portland cement type 1
Size
92.6 LB Bag
Bags/Pallet
40
FEDERAL WHITE CEMENT
Federal White Cement is a Portland cement manufactured with select raw materials to insure negligible amounts of iron and manganese oxides which are the chief contributors of grey cement color. Federal White Cement can be used for all types of architectural or structural concrete construction where a whiter or brighter color may be needed for aesthetic or safety reasons.
-
Used to produce bright finishes and vibrant colors in architectural concrete.
-
Complies with ATSM C150 standard specification for portland cement type 1
Size
92.6 LB Bag
Bags/Pallet
40
CIMSA SUPER WHITE CEMENT
CIMSA Super White cement has superior strength characteristics. It provides far more strength beyond grey cements and it is primarily preferred by especially precast producers. It is preferred in the building chemicals sector for both its superior adhesive strength and also high level of whiteness.The advantages of using CIMSA Super White cement is the low alkali content, high whiteness, high early and final strength.
-
Used to produce bright finishes and vibrant colors in architectural concrete.
-
Complies with ATSM C150 standard specification for portland cement type 1
Size
94 LB Bag
Bags/Pallet
35
CALUCEM LUMNITE® MG
LUMNITE® MG is a high strength rapid hardening calcium aluminate cement in the color anthracite brown. LUMNITE® MG is a fused, low purity calcium aluminate (CA) cement designed to contribute special properties in materials for the building chemistry, construction, and related applications.
-
Repair mortars
-
Title adhesives
-
Heat Resistant refectory concrete and mortar
-
High heat resistance up to 1250°
Size
94 LB Bag
120 GRADE GGBF SLAG CEMENT SUPPLEMENT
Slag cement, a byproduct of steel-making, enhances the traditional concrete benefits of strength and durability while offering reductions in waste, energy use and greenhouse gas emissions. Slag cement is used in concrete for virtually any construction application, either in conjunction with traditional portland cement, part of blended cement or as a separate component. It typically replaces part of the portland cement in concrete mixes.
Key Features/Benefits:
-
Easier to Place and Finish
-
Higher strength
-
Lower permeability
-
Better resistance to corrosive chemicals
-
Lighter color than conventional concrete
Size
50 LB Bag
2000 LB Sack
Bags/Pallet
56
1 Sack